Working area

Machine has a wide working area to fully support the material while cutting. The plate is supported by a central pivot with preloadedd bearings.

Graduated scale

H 601 worktable has a system with cutting grades reported on the plate that allows to always have the highest precision and accuracy while setting the cutting angle.

Steel sawframe

H 601 has a rigid steel electrowelded sawframe with tubolar section to have maximum stability while working. T Saw movement onto big size column through two recirculating ballscrews linear guides. To increase the cutting performance, the bandsaw has a very high blade tension (2000kg/cm2).

6° blade inclination

H 601 allows to have the hightest efficiency and high cutting performances even on big section thanks to the 6° blade inclination that ease the material penetration even on solids and full pieces and helps avoiding any vibration, binding or slowdown while working.

Blocking vice

It's also present an hydraulic blocking vice sliding on chromed bar with 260mm height closing jaws.

Material detection device

To ease the fast approach of the saw blade to the material, the machine is equipped with an innovative mechanical material detection device which allows to easy set automatically the first cut point.

End-cut point

The machine is equipped with a control micro-switch on the mobile blade guide for the automatic detection of the end-cut point.

Horizontal supporting roll

The machine has a supplementary support roll placed on the loading side for a better support to the material even on bigger sizes. It's also present, on the loading side, a predisposition for roller table.

Panel control

Stand-alone, the mobile panel control gives the operator full control of the cutting process, allowing to set all the main working parameters thanks to an easy interface.

Variable blade speed

The machine is equipped with ESC, electronic inverter for variable speed so that it's suitable to cut different materials.

High performance (Optional)

It's possibile to improve machine and cutting performances applying the 4KW supplementary motor reducer for 41mm blade and hydraulic tensioning.

Cutting angle view (Optional)

It's available as a optional the LCD dispaly to view the set cutting angle.

Minimal lubrification system (Optional)

It is possible to require , for all Imet machines, the minimal lubrication system , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected

Laser ray (Optional)

The laser ray allows to optimize the cutting process by indicating the cutting line that will be executed

Bundle cutting device (Optional)

Hydraulic bundle cutting device for H 601. Maximum cutting capacity is 600x250mm, minimum 150x60mm